; any numbers in here are in mm
; whether a metric machine or not
[Options]
Comment=Milling
File Extension=ncd
Line Numbers=False
Line Number Start=10
Line Number Step=10
Line Number Char=N
Comment Char={59}
Inch Mode=Yes
Metric Code=G21
Inch Code=G20
Add Comments=NO

[Axes]
Number of axes=3
Axis Letter0=X
Axis Letter1=Y
Axis Letter2=Z
Modal Positions=True
Axis Seperator={32}
Safe2=5.08

[Linear Moves]
Rapid=G00 {POSITION}
Initial Feed=G01 {POSITION} F{FEEDRATE}
Initial Feed No Feed=G01 {POSITION}
Feed={POSITION}

[Arc Moves]
Expand Arcs=False
Arc Step Size=0.1
Min Arc Radius=0.2
Plane Switching=False
Plane01 Code=G17
Plane02 Code=G18
Plane12 Code=G19
Output Centre=True
Absolute Centre=False
Centre Letter0=I
Centre Letter1=J
Centre Letter2=K
Radius Letter=R
CW Move=G02 {POSITION} {CENTREPOSITION}
CCW Move=G03 {POSITION} {CENTREPOSITION}
Initial CW Move=G02 {POSITION} {CENTREPOSITION} F{FEEDRATE}
Initial CW Move No Feed=G02 {POSITION} {CENTREPOSITION}
Initial CCW Move=G03 {POSITION} {CENTREPOSITION} F{FEEDRATE}
Initial CCW Move No Feed=G03 {POSITION} {CENTREPOSITION}


[Header]
{MMINCHCODE}
G90
;{59}Denford Post Output - {APPLICATION}
;{59}Date: {DATE}
;{59}Time: {TIME}
;{59}Source File: {SOURCEFILE}
;{59}BILLET X{BILLET0} Y{BILLET1} Z{BILLET2}
L01 G10 Z0.25 F4
G10 X4
G10 Y2
G92 X0 Y0 Z0

[Footer]
G0 Z{SAFE2}
M02

[Tool Change]
;{91}TOOLDEF T{TOOL} D{TOOLDIAM}
;G90 G00 Z{SAFE2}
;G91 G28 X0 Y0 Z0 M05
;M5
;G90 M6 T{TOOL}
;M03 S{SPINDLERPM}


[Format Strings]
Tool=%0:0.2d%0:0.2d
Axis0=%1.4f
Feedrate=%1.1f
Spindle=%1.0f

[Scaling]
Axis0=1
Axis1=1
Axis2=1
Spindle=1
Feedrate=1