; any numbers in here are in mm
; whether a metric machine or not
[Options]
Comment=DOS Mc Imperial
File Extension=pnc
Line Numbers=False
Line Number Start=10
Line Number Step=10
Line Number Char=N
Comment Char={40}
Inch Mode=Yes
Metric Code=G71
Inch Code=G70
Add Comments=NO

[Axes]
Number of axes=3
Axis Letter0=X
Axis Letter1=Y
Axis Letter2=Z
Modal Positions=True
Axis Seperator=
Safe2=2

[Linear Moves]
Rapid=G0{POSITION}L
Initial Feed=G1{POSITION}F{FIRSTAXISLETTER}{FEEDRATE}L
Initial Feed No Feed=G1{POSITION}L
Feed=G1{POSITION}L

[Arc Moves]
Expand Arcs=False
Arc Step Size=0.1
Min Arc Radius=0.2
Plane Switching=False
Plane01 Code=
Plane02 Code=
Plane12 Code=
Output Centre=True
Absolute Centre=YES
Centre Letter0=X
Centre Letter1=Y
Centre Letter2=Z
Radius Letter=R
CW Move=G2{POSITION}C{CENTREPOSITION}L
CCW Move=G3{POSITION}C{CENTREPOSITION}L
Initial CW Move=G2{POSITION}C{CENTREPOSITION}F{FIRSTAXISLETTER}{FEEDRATE}L
Initial CW Move No Feed=G2{POSITION}C{CENTREPOSITION}L
Initial CCW Move=G3{POSITION}C{CENTREPOSITION}F{FIRSTAXISLETTER}{FEEDRATE}L
Initial CCW Move No Feed=G3{POSITION}C{CENTREPOSITION}L
Single Quadrant Arcs=True

[Header]
G90L
{MMINCHCODE}L

[Footer]
G0Z{SAFE2}L
M5L
M2L

[Tool Change]
M5L
M6T{TOOL}L
M3S{SPINDLERPM}L


[Format Strings]
Tool=%0.1d
Axis0=%1.4f
Feedrate=%1.0f
Spindle=%1.0f

[Scaling]
Axis0=1
Axis1=1
Axis2=1
Spindle=1
Feedrate=1